In-situ studies with photons, neutrons and electrons scattering

In-situ scattering and diffraction measurements using synchrotron and neutronbeam lines have become a viable tool to look at the non-equilibrium processing of advanced materials. This volume presents the subject from the theoreticaland experimental standpoint, in order to provide a closer insight into the different synchrotron and neutron diffraction techniques as well as innovative microscopy techniques. It addresses the following items: - Phase detection and quantification - In-situ welding experiments - Stress/strain build-up - Model development and Simulation - Analysis tools and programming Provides a closer insight into the different synchrotron and neutron diffraction techniques International experts to discuss the subject from the theoretical and experimentalstandpoint Written for experts in this field INDICE: In-situ study of phase transformation in steel during welding.- In-Situ Studies of Phase Transformation and Residual Stresses in LTT Alloys during Welding Using Synchrotron Radiation.- In situ Scanning Electron Microscopy High Temperature Deformation Experiments to Study Ductility Dip Cracking of Ni-Cr-Fe Alloys.- Grain nucleation and growth of individual austenite and ferrite grains studied by 3DXRD microscopy at the ESRF.- Direct analysis of solidification-mode during welding for the assessment of hot-cracking.- In-situ synchrotron study of inclusions in the weld pool for the assessment of nucleation potency of acicular ferrite.- Characterization of solid state phase transformation in continuously heated and cooled ferritic weld metal.- In-Situ Determination of Phase Transformations and Structural Changes during Non-equilibrium Material Processing.- In-situ phase transformation studies on a transformation induced plasticity (TRIP) steel under simulated weld thermal cycles using synchrotron diffraction.- Imaging fast processes in liquid metal foams and semi-solidalloys using synchrotron radioscopy with spatio-temporal micro-resolution.- In situ Measurements for Structural Integrity: An Engineer’s Perspective.- In situ Neutron Diffraction during Thermo-mechanically Controlled Process for Low Alloy Steels.- Influence of plastic deformation on the residual stress distribution and fatigue behaviour of high strength steels welds.

• ISBN: 978-3-642-14793-7
• Editorial: Springer
• Encuadernacion: Cartoné
• Páginas: 350
• Fecha Publicación: 01/10/2010
• Nº Volúmenes: 1
• Idioma: Inglés